keyboard_return Exit
keyboard_arrow_left

IELTSPakikinigPagsasanay25

settings  Setting
 
schedule07:30
This listening practice simulates the third section of the IELTS Listening test. Listen to the audio and answer questions 21-30.
Subscribe to take the test

lock_open Start free trial
Subscribe to unlock all listening content

lock_open Start free trial
Note: During the instruction audio, you will have 20 seconds to look at questions before listening to the conversation.
Questions 21-25
How does each bridge type mainly work?
  • 21. Beam bridges
  • 22. Arch bridges
  • 23. Truss bridges
  • 24. Suspension bridges
  • 25. Cantilever bridges

Suitable only where the gap is limited.
Roadway carried by a cable-and-tower system.
Strength comes from a triangular framework.
Forces are pushed sideways into end supports.
Balanced arms project towards one another.
Usually built across very wide gorges.
Having trouble with drag & drop?   Fix Drag & Drop
How does each bridge type mainly work?
  1. Suitable only where the gap is limited.
  2. Roadway carried by a cable-and-tower system.
  3. Strength comes from a triangular framework.
  4. Forces are pushed sideways into end supports.
  5. Balanced arms project towards one another.
  6. Usually built across very wide gorges.

Select the correct letter A-F next to questions 21-25.

21. Beam bridges
22. Arch bridges
23. Truss bridges
24. Suspension bridges
25. Cantilever bridges

Bring back Drag & Drop anytime!   Reload Drag & Drop

The correct answer is A because Hannah explains that beam bridges work for short crossings but begin to sag when the distance becomes too great.

Associated Text:
beam bridges are best for short, straight crossings, once the span gets too long, the beam starts to sag in the middle

The correct answer is D because Hannah explains that the curved form of an arch sends the force sideways into the end supports.

Associated Text:
The arch forms a curve which transfers the weight outwards to abutments at each end.

The correct answer is C because Marcus explains that truss bridges get their strength from triangular sections of iron or steel.

Associated Text:
They're built from interlocking triangular sections of iron or steel, and the triangles are what give them their strength,

The correct answer is B because Marcus explains that suspension bridges carry the road deck using cables supported by towers.

Associated Text:
The road deck hangs from cables that are slung from tall towers on either side, and the cables themselves are anchored into the ground at each end.

The correct answer is E because Hannah explains that cantilever bridges use two projecting arms that extend from opposite sides and meet.

Associated Text:
They're built so that two arms, called cantilevers, extend out from the anchorages on each shore until they meet in the middle.

Questions 26-30
Complete the flow chart using the list of words, A-H, below.

Complete the flow chart below.

The inspection team is assigned a bridge to assess.
They check earlier (26) records.
A visual inspection checks for obvious problems.
Sensors take (27) as vehicles pass over.
Cores are extracted from the concrete piers.
Samples are tested for (28) in the reinforcement.
A drone photographs the underside for cracks and (29) .
The (30) are compiled and sent to the highway authority.
A. corrosion
B. traffic
C. vibration
D. deformations
E. history
F. weather
G. findings
H. temperature
Having trouble with drag & drop?   Fix Drag & Drop
  1. corrosion
  2. traffic
  3. vibration
  4. deformations
  5. history
  6. weather
  7. findings
  8. temperature
The inspection team is assigned a bridge to assess.
They check earlier (26) records.
A visual inspection checks for obvious problems.
Sensors take (27) as vehicles pass over.
Cores are extracted from the concrete piers.
Samples are tested for (28) in the reinforcement.
A drone photographs the underside for cracks and (29) .
The (30) are compiled and sent to the highway authority.

Bring back Drag & Drop anytime!   Reload Drag & Drop

The correct answer is E because the first preparation step is reviewing the bridge's history records before visiting the site.

Associated Text:
The team starts by reviewing the bridge's history records, the original drawings, the design calculations, every previous inspection, every repair.

The correct answer is C because stress sensors are attached to record vibration as traffic crosses the bridge.

Associated Text:
Then stress sensors are attached to record the level of vibration as traffic crosses the bridge.

The correct answer is A because the extracted concrete samples are tested for corrosion in the steel reinforcement.

Associated Text:
The samples are then tested for signs of corrosion in the steel reinforcement.

The correct answer is D because the drone photographs the underside to look for cracks and small deformations.

Associated Text:
a drone is used to photograph the underside, looking for cracks and small deformations,

The correct answer is G because after the inspection and analysis, the findings are compiled into a report for the highway authority.

Associated Text:
the findings are compiled into a report and submitted to the highway authority.

Answer Sheet
1
N/A
2
N/A
3
N/A
4
N/A
5
N/A
6
N/A
7
N/A
8
N/A
9
N/A
10
N/A
11
N/A
12
N/A
13
N/A
14
N/A
15
N/A
16
N/A
17
N/A
18
N/A
19
N/A
20
N/A
21
22
23
24
25
26
27
28
29
30
31
N/A
32
N/A
33
N/A
34
N/A
35
N/A
36
N/A
37
N/A
38
N/A
39
N/A
40
N/A
Subscribe to unlock all listening content

lock_open Start free trial
Buod ng Iskor
0 / 1
Multiple Choice
Summary Completion
Multiple Selection
Short Answer
Matching
Sentence Completion
Diagram Labelling
Note Completion
Form Completion
Table Completion
Flow Chart Completion
Hello!   :)

Submit your listening answers to auto generate this report.
Mga keyword sa practice
Walang vocabulary na naka-link sa practice
IELTS listening LessonsCompleted: 0 / 69
close