TOEFL Speaking 1 Practice 63

To pronounce the 'ow sound' <strong>oʊ</strong> the body of the tongue is pushed back and in a low-to-mid mouth position and the bottom teeth can be felt along the sides of the tongue. Then the sound moves into a 'w sound' <strong>w</strong> by raising the jaw slightly while closing the lips into a small circle. The body of the tongue moves upward until the tongue is near the back of the hard palate.

To create <strong>ð</strong> sound the tip of the tongue is placed behind the top front teeth. The friction occurs between the tip of the tongue and the top front teeth. Subtle friction may also occur between the top of the front of the tongue and the tooth ridge.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the <strong>r</strong> sound the back of the tongue is raised so the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound. The tip of the tongue may point upward, or may be left low.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the <strong>p</strong>, air is briefly prevented from leaving the vocal tract by closing the lips. The sound is aspirated when the air is released.

To create the <strong>r</strong> sound the back of the tongue is raised so the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound. The tip of the tongue may point upward, or may be left low.

To pronounce the 'ow sound' <strong>oʊ</strong> the body of the tongue is pushed back and in a low-to-mid mouth position and the bottom teeth can be felt along the sides of the tongue. Then the sound moves into a 'w sound' <strong>w</strong> by raising the jaw slightly while closing the lips into a small circle. The body of the tongue moves upward until the tongue is near the back of the hard palate.

To create the <strong>g</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>g</strong> is less than that for a <strong>k</strong>.

To create the <strong>r</strong> sound the back of the tongue is raised so the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound. The tip of the tongue may point upward, or may be left low.

To pronounce the <strong>ae</strong> sound the front of the tongue is pushed further forward and is held lower in the mouth when forming the 'short a' /æ/ sound than with any other vowel sound. The tip of the tongue will touch the inside of the bottom front teeth. The body of the tongue is rounded slightly upward. The jaw is lowered and the lips are held apart, allowing the entire oral cavity to remain open.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create the 'n sound' <strong>n</strong>, the air is blocked from leaving the mouth by pressing the tip against the tooth ridge and the sides of the front of the tongue against the side teeth. The soft palate drops, allowing air to pass out through the nose. The sound is voiced, so the vocal cords vibrate while producing it.

To create this sound air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released.

To pronounce the <strong>eɪ</strong> sound, begin with the tongue pushed somewhat forward but in a neutral position in the mouth. Then, as the jaw closes slightly, move the body of the tongue upward until it is near the tooth ridge--similar to the position of a 'y sound' <strong>y</strong>. The front sides of the tongue touch the inside of the top teeth at the end of the sound.

To create the <strong>t</strong>, air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released. The aspiration for a <strong>t</strong> is greater than the aspiration for a /d/, especially when it is the first sound of a word or the first sound of a stressed syllable.

To pronounce the <strong>ae</strong> sound the front of the tongue is pushed further forward and is held lower in the mouth when forming the 'short a' /æ/ sound than with any other vowel sound. The tip of the tongue will touch the inside of the bottom front teeth. The body of the tongue is rounded slightly upward. The jaw is lowered and the lips are held apart, allowing the entire oral cavity to remain open.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the 'w sound' <strong>w</strong> the jaw is mostly closed and the lips form a small, tight circle. The sound is voiced, so the vocal cords must vibrate during the production of the sound.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To pronounce the 'aa sound' <strong>ɑ</strong> the vocal tract is very open for the production of the 'aa sound' <strong>ɑ</strong>. In fact, the jaw is held more open and the back of the tongue is held lower for this sound than any other American English vowel sound pronunciation. The tongue touches the inside of the bottom teeth so that the top of the tongue is nearly even with the top of the bottom teeth. The lips are held open and kept rounded, but relaxed.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the <strong>ʤ</strong> sound, air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the back tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released with friction.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To create the 'oo sound' <strong>u</strong>, the lips are pulled into a tense, small circle. In addition, the back of the tongue is raised to a high position and sides of the tongue may touch the top teeth at the back of the mouth.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the 'w sound' <strong>w</strong> the jaw is mostly closed and the lips form a small, tight circle. The sound is voiced, so the vocal cords must vibrate during the production of the sound.

To create the <strong>ɚ</strong> sound first raise the back of the tongue so that the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound.

To create the <strong>r</strong> sound the back of the tongue is raised so the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound. The tip of the tongue may point upward, or may be left low.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create this sound air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released.

To pronounce the <strong>eɪ</strong> sound, begin with the tongue pushed somewhat forward but in a neutral position in the mouth. Then, as the jaw closes slightly, move the body of the tongue upward until it is near the tooth ridge--similar to the position of a 'y sound' <strong>y</strong>. The front sides of the tongue touch the inside of the top teeth at the end of the sound.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To pronounce the <strong>ae</strong> sound the front of the tongue is pushed further forward and is held lower in the mouth when forming the 'short a' /æ/ sound than with any other vowel sound. The tip of the tongue will touch the inside of the bottom front teeth. The body of the tongue is rounded slightly upward. The jaw is lowered and the lips are held apart, allowing the entire oral cavity to remain open.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create this sound air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the back tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released with friction.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the <strong>p</strong>, air is briefly prevented from leaving the vocal tract by closing the lips. The sound is aspirated when the air is released.

To create the <strong>r</strong> sound the back of the tongue is raised so the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound. The tip of the tongue may point upward, or may be left low.

To pronounce the 'ow sound' <strong>oʊ</strong> the body of the tongue is pushed back and in a low-to-mid mouth position and the bottom teeth can be felt along the sides of the tongue. Then the sound moves into a 'w sound' <strong>w</strong> by raising the jaw slightly while closing the lips into a small circle. The body of the tongue moves upward until the tongue is near the back of the hard palate.

To create the <strong>g</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>g</strong> is less than that for a <strong>k</strong>.

To create the <strong>r</strong> sound the back of the tongue is raised so the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound. The tip of the tongue may point upward, or may be left low.

To pronounce the <strong>ae</strong> sound the front of the tongue is pushed further forward and is held lower in the mouth when forming the 'short a' /æ/ sound than with any other vowel sound. The tip of the tongue will touch the inside of the bottom front teeth. The body of the tongue is rounded slightly upward. The jaw is lowered and the lips are held apart, allowing the entire oral cavity to remain open.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the <strong>ʤ</strong> sound, air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the back tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released with friction.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To create the <strong>t</strong>, air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released. The aspiration for a <strong>t</strong> is greater than the aspiration for a /d/, especially when it is the first sound of a word or the first sound of a stressed syllable.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the 'm sound' <strong>m</strong>, the lips are pressed together, causing the air to be blocked from leaving the mouth. The soft palate drops, allowing air to pass out through the nose. The sound is voiced, so the vocal cords vibrate while producing it.

To create the <strong>b</strong>, air is briefly prevented from leaving the vocal tract by closing the lips. The sound is aspirated when the air is released.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To pronounce the <strong>eɪ</strong> sound, begin with the tongue pushed somewhat forward but in a neutral position in the mouth. Then, as the jaw closes slightly, move the body of the tongue upward until it is near the tooth ridge--similar to the position of a 'y sound' <strong>y</strong>. The front sides of the tongue touch the inside of the top teeth at the end of the sound.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To create the 'w sound' <strong>w</strong> the jaw is mostly closed and the lips form a small, tight circle. The sound is voiced, so the vocal cords must vibrate during the production of the sound.

To create the <strong>ɚ</strong> sound first raise the back of the tongue so that the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To pronounce the 'ow sound' <strong>oʊ</strong> the body of the tongue is pushed back and in a low-to-mid mouth position and the bottom teeth can be felt along the sides of the tongue. Then the sound moves into a 'w sound' <strong>w</strong> by raising the jaw slightly while closing the lips into a small circle. The body of the tongue moves upward until the tongue is near the back of the hard palate.

To create the 'm sound' <strong>m</strong>, the lips are pressed together, causing the air to be blocked from leaving the mouth. The soft palate drops, allowing air to pass out through the nose. The sound is voiced, so the vocal cords vibrate while producing it.

To create the 'w sound' <strong>w</strong> the jaw is mostly closed and the lips form a small, tight circle. The sound is voiced, so the vocal cords must vibrate during the production of the sound.

To create the <strong>ɚ</strong> sound first raise the back of the tongue so that the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound.

To create the <strong>r</strong> sound the back of the tongue is raised so the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound. The tip of the tongue may point upward, or may be left low.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To pronounce the 'ow sound' <strong>oʊ</strong> the body of the tongue is pushed back and in a low-to-mid mouth position and the bottom teeth can be felt along the sides of the tongue. Then the sound moves into a 'w sound' <strong>w</strong> by raising the jaw slightly while closing the lips into a small circle. The body of the tongue moves upward until the tongue is near the back of the hard palate.

To create the 'sh sound' <strong>ʃ</strong>, air is forced between a wide groove in the center of the front of the tongue and the back of the tooth ridge. The sides of the blade of the tongue may touch the side teeth. The lips are kept slightly tense, and may protrude somewhat during the production of the sound. This sound is a continuous consonant, meaning that it should be capable of being produced for a few seconds with even and smooth pronunciation for the entire duration.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To create the 'oo sound' <strong>u</strong>, the lips are pulled into a tense, small circle. In addition, the back of the tongue is raised to a high position and sides of the tongue may touch the top teeth at the back of the mouth.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To create the 'm sound' <strong>m</strong>, the lips are pressed together, causing the air to be blocked from leaving the mouth. The soft palate drops, allowing air to pass out through the nose. The sound is voiced, so the vocal cords vibrate while producing it.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To pronounce the <strong>ɛ</strong> sound the middle of the tongue rounds slightly upward and the sides of the tongue may lightly touch the top and bottom side teeth. The lips and jaw are loose and relaxed.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the 'm sound' <strong>m</strong>, the lips are pressed together, causing the air to be blocked from leaving the mouth. The soft palate drops, allowing air to pass out through the nose. The sound is voiced, so the vocal cords vibrate while producing it.

To pronounce the <strong>ɛ</strong> sound the middle of the tongue rounds slightly upward and the sides of the tongue may lightly touch the top and bottom side teeth. The lips and jaw are loose and relaxed.

To create the 'n sound' <strong>n</strong>, the air is blocked from leaving the mouth by pressing the tip against the tooth ridge and the sides of the front of the tongue against the side teeth. The soft palate drops, allowing air to pass out through the nose. The sound is voiced, so the vocal cords vibrate while producing it.

To create the <strong>t</strong>, air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released. The aspiration for a <strong>t</strong> is greater than the aspiration for a /d/, especially when it is the first sound of a word or the first sound of a stressed syllable.

To create the <strong>r</strong> sound the back of the tongue is raised so the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound. The tip of the tongue may point upward, or may be left low.

To create the 'm sound' <strong>m</strong>, the lips are pressed together, causing the air to be blocked from leaving the mouth. The soft palate drops, allowing air to pass out through the nose. The sound is voiced, so the vocal cords vibrate while producing it.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To pronounce the 'ow sound' <strong>oʊ</strong> the body of the tongue is pushed back and in a low-to-mid mouth position and the bottom teeth can be felt along the sides of the tongue. Then the sound moves into a 'w sound' <strong>w</strong> by raising the jaw slightly while closing the lips into a small circle. The body of the tongue moves upward until the tongue is near the back of the hard palate.

To create the 'z sound' <strong>z</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create the 'z sound' <strong>z</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To pronounce the <strong>ae</strong> sound the front of the tongue is pushed further forward and is held lower in the mouth when forming the 'short a' /æ/ sound than with any other vowel sound. The tip of the tongue will touch the inside of the bottom front teeth. The body of the tongue is rounded slightly upward. The jaw is lowered and the lips are held apart, allowing the entire oral cavity to remain open.

To create the <strong>t</strong>, air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released. The aspiration for a <strong>t</strong> is greater than the aspiration for a /d/, especially when it is the first sound of a word or the first sound of a stressed syllable.

To create the 'm sound' <strong>m</strong>, the lips are pressed together, causing the air to be blocked from leaving the mouth. The soft palate drops, allowing air to pass out through the nose. The sound is voiced, so the vocal cords vibrate while producing it.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To create the 'f sound' <strong>f</strong>, the jaw is held nearly closed. The upper backside of the bottom lip is pressed very lightly into the bottom of the top teeth. Air is pushed out the mouth between the top teeth and the upper backside of the bottom lip. This sound is to be a continuous consonant, meaning that it should be capable of being produced for a few seconds with even and smooth pronunciation for the entire duration. The lips are kept mostly relaxed during the production of the <strong>f</strong>. A common error English language learners make is overproducing this sound by curling the bottom lip under the top teeth. This creates problems when linking other sounds to and from the <strong>f</strong>.

To pronounce the <strong>i</strong> sound the tongue is forward, with the body of the tongue near the tooth ridge. The tongue is higher in the mouth for this sound compared to all other vowels in English. Because the tongue is so high, the jaw is relatively closed during the <strong>i</strong> sound. The sides of the tongue touch the top, side teeth during the sound.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To create this sound air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create the 'f sound' <strong>f</strong>, the jaw is held nearly closed. The upper backside of the bottom lip is pressed very lightly into the bottom of the top teeth. Air is pushed out the mouth between the top teeth and the upper backside of the bottom lip. This sound is to be a continuous consonant, meaning that it should be capable of being produced for a few seconds with even and smooth pronunciation for the entire duration. The lips are kept mostly relaxed during the production of the <strong>f</strong>. A common error English language learners make is overproducing this sound by curling the bottom lip under the top teeth. This creates problems when linking other sounds to and from the <strong>f</strong>.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To create the <strong>t</strong>, air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released. The aspiration for a <strong>t</strong> is greater than the aspiration for a /d/, especially when it is the first sound of a word or the first sound of a stressed syllable.

To create <strong>ð</strong> sound the tip of the tongue is placed behind the top front teeth. The friction occurs between the tip of the tongue and the top front teeth. Subtle friction may also occur between the top of the front of the tongue and the tooth ridge.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the <strong>k</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>k</strong> is greater than that used for a <strong>g</strong>.

To create the <strong>l</strong>, the tip of the tongue is placed against the middle of the tooth ridge. The sound is created when air travels alongside the tip of the tongue, between the front of the tongue and the side teeth.

To pronounce the <strong>ae</strong> sound the front of the tongue is pushed further forward and is held lower in the mouth when forming the 'short a' /æ/ sound than with any other vowel sound. The tip of the tongue will touch the inside of the bottom front teeth. The body of the tongue is rounded slightly upward. The jaw is lowered and the lips are held apart, allowing the entire oral cavity to remain open.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To pronounce the <strong>ɪ</strong> sound the lips are relaxed and the central/front area of the tongue is in the central/high area of the mouth for this sound. The overall neutrality and relaxed tongue and lip position is why it is one of the pronunciations used in an unstressed vowel position.

To pronounce the <strong>ae</strong> sound the front of the tongue is pushed further forward and is held lower in the mouth when forming the 'short a' /æ/ sound than with any other vowel sound. The tip of the tongue will touch the inside of the bottom front teeth. The body of the tongue is rounded slightly upward. The jaw is lowered and the lips are held apart, allowing the entire oral cavity to remain open.

To create the 'n sound' <strong>n</strong>, the air is blocked from leaving the mouth by pressing the tip against the tooth ridge and the sides of the front of the tongue against the side teeth. The soft palate drops, allowing air to pass out through the nose. The sound is voiced, so the vocal cords vibrate while producing it.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the 'f sound' <strong>f</strong>, the jaw is held nearly closed. The upper backside of the bottom lip is pressed very lightly into the bottom of the top teeth. Air is pushed out the mouth between the top teeth and the upper backside of the bottom lip. This sound is to be a continuous consonant, meaning that it should be capable of being produced for a few seconds with even and smooth pronunciation for the entire duration. The lips are kept mostly relaxed during the production of the <strong>f</strong>. A common error English language learners make is overproducing this sound by curling the bottom lip under the top teeth. This creates problems when linking other sounds to and from the <strong>f</strong>.

To pronounce the <strong>ɛ</strong> sound the middle of the tongue rounds slightly upward and the sides of the tongue may lightly touch the top and bottom side teeth. The lips and jaw are loose and relaxed.

To create the 'f sound' <strong>f</strong>, the jaw is held nearly closed. The upper backside of the bottom lip is pressed very lightly into the bottom of the top teeth. Air is pushed out the mouth between the top teeth and the upper backside of the bottom lip. This sound is to be a continuous consonant, meaning that it should be capable of being produced for a few seconds with even and smooth pronunciation for the entire duration. The lips are kept mostly relaxed during the production of the <strong>f</strong>. A common error English language learners make is overproducing this sound by curling the bottom lip under the top teeth. This creates problems when linking other sounds to and from the <strong>f</strong>.

To create the <strong>r</strong> sound the back of the tongue is raised so the sides of the tongue touch the back teeth. The center of the back of the tongue is lower and the air travels through this groove to create the sound. The tip of the tongue may point upward, or may be left low.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To pronounce the 'ow sound' <strong>oʊ</strong> the body of the tongue is pushed back and in a low-to-mid mouth position and the bottom teeth can be felt along the sides of the tongue. Then the sound moves into a 'w sound' <strong>w</strong> by raising the jaw slightly while closing the lips into a small circle. The body of the tongue moves upward until the tongue is near the back of the hard palate.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the <strong>ʤ</strong> sound, air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the back tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released with friction.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To create the 's sound' <strong>s</strong>, the front of the tongue is placed close to the tooth ridge. The tip of the tongue should be close to the upper backside of the top front teeth. The tongue is kept tense as air is pushed between a small groove along the center of the tip of the tongue and the front of the tooth ridge. The front sides of the tongue touch the side teeth toward the front of the mouth. The lips are held slightly tense during the sound.

To create the <strong>t</strong>, air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released. The aspiration for a <strong>t</strong> is greater than the aspiration for a /d/, especially when it is the first sound of a word or the first sound of a stressed syllable.

To create the <strong>g</strong>, air is briefly prevented from leaving the vocal tract when the back of the tongue lifts and presses against the soft palate at the back of the mouth. The sound is aspirated when the air is released. The amount of aspiration used to produce a <strong>g</strong> is less than that for a <strong>k</strong>.

To pronounce the <strong>ɛ</strong> sound the middle of the tongue rounds slightly upward and the sides of the tongue may lightly touch the top and bottom side teeth. The lips and jaw are loose and relaxed.

To create the <strong>t</strong>, air is briefly prevented from leaving the vocal tract when the tip of the tongue presses against the tooth ridge while the sides of the tongue press against the upper side teeth. The sound is aspirated when the air is released. The aspiration for a <strong>t</strong> is greater than the aspiration for a /d/, especially when it is the first sound of a word or the first sound of a stressed syllable.

To create the <strong>b</strong>, air is briefly prevented from leaving the vocal tract by closing the lips. The sound is aspirated when the air is released.

To pronounce the <strong>aɪ</strong> at the beginning of the sound, the tongue is low and touches the bottom, side teeth. Then as the jaw closes slightly, the body of the tongue moves upward until it is near the tooth ridge, similar to the position of a 'y sound'. The front sides of the tongue touch the inside of the top, side teeth.

To create the <strong>b</strong>, air is briefly prevented from leaving the vocal tract by closing the lips. The sound is aspirated when the air is released.

To create the 'ah sound' <strong>ə</strong> the body of the tongue is relaxed and set low in the mouth. The sides of the tongue lightly touch the bottom teeth during the formation of the sound. The jaw is kept in a neutral position, and the lips are relaxed. It is very similar to the 'other ah sound' <strong>ʌ</strong>.

To pronounce the <strong>ae</strong> sound the front of the tongue is pushed further forward and is held lower in the mouth when forming the 'short a' /æ/ sound than with any other vowel sound. The tip of the tongue will touch the inside of the bottom front teeth. The body of the tongue is rounded slightly upward. The jaw is lowered and the lips are held apart, allowing the entire oral cavity to remain open.